Wednesday, November 30, 2011

Australian court clears sale of Samsung Galaxy tab (AP)

SYDNEY ? Samsung Electronics Co. is closer to selling its new Galaxy tablet computer in Australia after a court on Wednesday overturned an earlier ruling that favored Apple's allegations Samsung had copied its iPad and iPhone.

The Federal Court's decision is a victory for Samsung in its bitter, international patent war with Apple Inc., and might be just in time for the Suwon, South Korea-based company to capitalize on the Christmas shopping season.

In October, Federal Court Justice Annabelle Bennett granted Apple's request for a temporary injunction against sales of Samsung's Galaxy Tab 10.1 in Australia, preventing Samsung from selling the device in the country in its current form.

Samsung quickly appealed that decision, and on Wednesday, the court agreed to lift the injunction and allow Galaxy sales to go ahead.

Still, Samsung will have to wait a few more days before it can begin selling the Galaxy, after Apple indicated it would appeal Wednesday's decision to the nation's High Court. Federal Court Justice Lindsay Foster agreed to keep the injunction in place until Friday while that issue is pending.

The battle began in April, when Cupertino, California-based Apple Inc. sued Samsung in the United States, alleging the product design, user interface and packaging of Samsung's Galaxy devices "slavishly copy" the iPhone and iPad. Samsung responded by filing its own lawsuits that accused Apple of patent infringement of its wireless telecommunications technology.

The fight has spread to 10 countries, with courts in several nations ? including Germany and the Netherlands ? ruling in favor of Apple.

The case has highlighted the perception that Samsung ? the global No. 1 in TVs and No. 2 in smartphones by sales ? is more of an imitator of clever technologies than an innovator in its own right. Apple, by contrast, is generally viewed by consumers as highly original and inventive.

Lawyers from both sides did not immediately respond to requests for comment.

Source: http://us.rd.yahoo.com/dailynews/rss/applecomputer/*http%3A//news.yahoo.com/s/ap/20111130/ap_on_hi_te/as_australia_samsung_apple

occupy los angeles jim boeheim jim boeheim big ten acc challenge adriana lima bobby valentine bobby valentine

Tuesday, November 29, 2011

Just Show Me: How to use iMessage on your iPhone or iPad (Yahoo! News)

Welcome to?Just Show Me on Tecca TV, where we show you tips and tricks for getting the most out of the?gadgets in your life. In today's episode we'll show you how to use iMessage?on your iPhone or iPad once you've upgraded to?iOS 5.

iMessages are just like text messages, only they're sent via the internet instead of over your cell phone provider's text message services. You can send iMessages to other compatible iOS 5 devices, and you'll know when you're able to because their name will show up with a blue background when you send them a message. We'll go over all the details with you in our video.

For more episodes of Just Show Me, subscribe to Tecca TV's YouTube channel and check out all our Just Show Me episodes. If you have any topics you'd like to see us cover, just drop us a line in the comments.

This article originally appeared on Tecca

More from Tecca:

Source: http://us.rd.yahoo.com/dailynews/rss/personaltech/*http%3A//news.yahoo.com/s/yblog_technews/20111128/tc_yblog_technews/just-show-me-how-to-use-imessage-on-your-iphone-or-ipad

houston nutt peter marshall peter marshall zombie boy zombie boy harvard yale julia child

Habs/Pens Open Thread (Balloon Juice)

Share With Friends: Share on FacebookTweet ThisPost to Google-BuzzSend on GmailPost to Linked-InSubscribe to This Feed | Rss To Twitter | Politics - Top Stories News, News Feeds and News via Feedzilla.

Source: http://news.feedzilla.com/en_us/stories/politics/top-stories/166776914?client_source=feed&format=rss

lady liberty lady liberty the rum diary addams family in time cj wilson statue of liberty

Monday, November 28, 2011

How To: Turn Your Instagram Photos Into Wall Art (Mashable)

Instagram photos aren't just for sharing online anymore. You can turn them into photo books, frame them in four-inch bamboo shadowbox frames, create a collage with them on iPhone cases, turn them into iPad screensavers and now, print them on canvas for your wall.

[More from Mashable: Artist Illustrates Finely Detailed Comic Book Magazine Cover [TIMELAPSE VIDEO]]

Earlier this week, CanvasPop launched a service that allows you to print your Instagram photos on two large-format canvas sizes: 12" x 12" (for $29.95) and 20" x 20" (for $59.95). The company sent over a 12" x 12" sample developed with an Instagram shot I took at Kate Spade's Spring 2012 presentation in October.

The original:

[More from Mashable: Scenes from Occupy Tahrir [PHOTOS]]

The print (taken with a less-than-great point-and-shoot):

A closeup:

I was impressed with the quality, particularly given the original image is 612 x 612 pixels at a resolution of 72 dpi. CanvasPop Co-Founder Adrian Salamunovic says the company uses "special filters," among other methods, to improve the photo quality when enlarged. "Plus, canvas is a medium that is naturally forgiving to low resolution images because it is textured and porous, as opposed to a high-gloss photo paper," he added.

The prints are 1.5" deep and can be made with either a white or black border. The canvas appears to be stapled to the back by hand -- as the staples aren't perfectly lined up -- and comes with a mount for hanging the print from the wall. Given the width of the prints, you can get away without framing them. And as you can see above, they look great in rows.

What do you do with your Instagram photos after you've shared them? Would you create print versions on canvas? Let us know in the comments below.

This story originally published on Mashable here.

Source: http://us.rd.yahoo.com/dailynews/rss/internet/*http%3A//news.yahoo.com/s/mashable/20111127/tc_mashable/how_to_turn_your_instagram_photos_into_wall_art

russell simmons joseph kony joseph kony 9 9 9 delmon young sprint chris tucker

Sunday, November 27, 2011

Russia's Troubled Mars Probe Highlights Falling Space Debris Hazard (SPACE.com)

The ongoing plight to save Russia's Phobos-Grunt Mars mission from a destructive nose-dive to Earth underscores a widespread anxiety of late regarding satellite leftovers tumbling onto terra firma.

The mission, a plan to visit Mars' moon Phobos, collect samples of its dirt, and return them to Earth, derailed when it stalled in Earth orbit after liftoff Nov. 8.

Long distance diagnosis of Phobos-Grunt's overall health is underway. Operators of the European Space Agency?s (ESA) 15-meter diameter dish antenna at Perth, Australia ? quickly modified to support communications with Phobos-Grunt ?made repeat contact with the spacecraft on Nov. 22 and Nov 23, offering a promising sign that it may still be possible to control the vehicle. However, another attempt on Nov. 24 to make contact with the probe failed.

"Last night we had a good pass over Perth and succeeded again in activating the downlink," Wolfgang Hell, the service manager overseeing ESA support to Russia?s NPO Lavochkin, the main contractor of the Phobos-Grunt project, told SPACE.com in a Nov. 24 email. "We got a strong signal and acquired telemetry. This night we had no success so far."

But whether or not the errant interplanetary probe can be resuscitated ? perhaps permitting a controlled re-entry to Earth, or even sending the craft toward a new destination ? remains to be seen. [Photos: Russia's Mars Moon Mission]

Flying adrift

Meanwhile, the 14-ton (13-metric ton) spacecraft is adrift, loaded with roughly 8 tons (7.5 metric tons) of hydrazine and nitrogen tetroxide fuels. If the spacecraft's numerous propellant tanks are made of aluminum, they are likely to fail early when it encounters the heat of re-entry. All that fuel ? whether frozen or unfrozen ? shouldn't make it to Earth's surface, according to re-entry analysts.

However, analysts must account for Phobos-Grunt's nose-cone shaped descent vehicle that was built to bring back to Earth bits and pieces of Phobos, one of the two moons of Mars. It's designed to fall through Earth's atmosphere and make a hard landing, sans parachute.

The probe also totes very small amounts of the radioactive element cobalt-57.

Then there's a bit of international embarrassment. Phobos-Grunt carries a hitchhiking Chinese Mars orbiter, Yinghuo-1, and the Living Interplanetary Flight Experiment funded by the U.S.-based Planetary Society.

If Phobos-Grunt does re-enter Earth's atmosphere, there will undoubtedly be some surviving spacecraft components. Just how much is a guessing game.

Heads up for ground-dwellers

The good news is that most of the Earth's surface is covered by water, and much of the remainder is unpopulated. Still, uncontrolled re-entries of space hardware do pose a small but estimable risk to ground-dwellers.?

If all this sounds a tad familiar, flip your calendar back to NASA's Upper Atmosphere Research Satellite (UARS), which fell back to Earth in uncontrolled mode over the Pacific Ocean in September. That re-entry was followed a month later by Germany's ROentgen SATellite (ROSAT), which fell in over the Bay of Bengal.

Orbital debris experts estimated that, collectively, those two satellites likely splat the Earth with over 2 1/2 tons of flying wreckage, including mirrors, batteries, chunks of reaction wheels and fuel tanks.

For its part, NASA is endorsing a new approach in spacecraft design to lessen the amount of surviving components during re-entry ? an idea termed "Design for Demise," or D4D in space agency short-hand.

Nicholas Johnson, NASA's chief scientist for orbital debris at the Johnson Space Center in Houston, said that objects that have commonly survived re-entry in the past are propellant and pressurant tanks, as well as elements of reaction wheel assemblies. "These are the routine, regular culprits," he told SPACE.com.

Redesign for demise

NASA's Goddard Space Flight Center in Greenbelt, Maryland has been at the forefront in championing the D4D concept.

"One of the ways that we can try to reduce the surviving debris is to redesign an object so that it will demise," said Scott Hull an orbital debris engineer at NASA Goddard. "Sometimes it is possible to redesign a component to a different shape, such that it will re-enter faster, thus generating more heat during re-entry."

Hull said common materials used in spacecraft components that take high heat loads include titanium, stainless steel, glass, ceramics, and beryllium.

Conversely, graphite-epoxy composites, aluminum, and polymers are far more vulnerable to intense temperatures, Hull said.

Flywheels and fuel tanks

Flywheels are a recurring survivor of reentry, but don't necessarily have to be, Hull pointed out. Off-the-shelf reaction wheels sometimes use stainless steel or titanium flywheels which allow higher torque or faster wheel speeds in a small diameter.

"We've found that the same torque can often be created by using a larger diameter flywheel made from aluminum, which will demise readily," Hull reported during an orbital debris meeting earlier this year.

The growing use of lithium-ion battery technology in spacecraft, Hull said, has helped to reduce the reentry risk for most new missions.

Propulsion system tanks can and do survive reentry, Hull explained, as most traditional tanks are made from titanium or stainless steel. Developmental work in fabricating tanks to be made from more demiseable materials is underway, he added.

The ultimate goal for D4D, concluded NASA's Johnson, is to come up with new space vehicle design practices that, from the start, take into account re-entry hazards. While NASA has started implementing D4D, it's up to other countries to work with their own industries and component suppliers to implement whatever is necessary.

"The word we're trying to get out to folks is that this is possible and is the right thing to be doing," Johnson said.

Leonard David has been reporting on the space industry for more than five decades. He is a winner of this year's National Space Club Press Award and a past editor-in-chief of the National Space Society's Ad Astra and Space World magazines. He has written for SPACE.com since 1999.

Source: http://us.rd.yahoo.com/dailynews/rss/space/*http%3A//news.yahoo.com/s/space/20111125/sc_space/russiastroubledmarsprobehighlightsfallingspacedebrishazard

five iron frenzy wild horses lyrics megyn kelly green bean casserole sweet potato recipes green bean casserole recipe ryan braun